This is a custom steel cyclocross frameset that was an oops. The rear triangle was welded with a standard road rear. It has been ridden for one year. We were able to dent the chainstays to fit a 30mm tire (I can fit a 32mm Tufo Elite, but is would only be good in dry conditions and has very little clearance). Seat tube measures 45.5cm C-T of collar. Top tube measures 52cm horizontal. Will include a carbon fork with aluminum steerer, seat collar, and headset. Fame is yellow with a metalic flake similiar to a bass
boat. There are a few paints chips at the drops outs and at the chain stays
where we put the slight dents. $175 plus some for shipping. Cranks, front
derailleur, and linear pull brakes can be included for an additional $75.
http://i1037.photobucket.com/albums/a455/offrhodes/1106121212.jpg
http://i1037.photobucket.com/albums/a455/offrhodes/1106121211b.jpg
Tags:
Sold something in our classifieds? Find this site valuable?
Consider a donation to the cause. We're cheaper than eBay fees, and it helps us here at CXM keep the lights on!
Enter any amount below, and click on the cow for some good karma. Thanks!
Posted by Paul Warloski on April 29, 2013 at 5:46pm 0 Comments 0 Likes
Posted by Dennis Meyer on March 18, 2013 at 2:32pm 0 Comments 0 Likes
Posted by elgee on March 18, 2013 at 6:38am 1 Comment 0 Likes
Posted by David Mayhew on February 28, 2013 at 5:51pm 0 Comments 0 Likes
© 2013 Created by cyclocross magazine.