Cyclocross Magazine

Cyclocross Community, Forums, Classifieds, Photos and Videos

Help! How to make Wout's green michelin mudd tires?

Step 1: win ebay auction for old (green) Michelin mud clincher - complete ($22!)

Step 2: remove old worn out tread from FMB casing - complete

Step 3: purchase barge cement - complete.

I would appreciate advice for the next steps to complete the process.  Sorry if this information is already posted, I can't seem to track it down.

To complete would be to mount the clincher with a tube and place on a trainer - fit a skinning knife (with a hook that won't pop the tube) and slowly rotate the tire and seperate center section of tread from side casing.

Fit tubular onto stretcher rim, just enough psi to take shape

Apply barge cement to both surfaces, let sit per instructions.

Fit tread to casing on stretcher rim.

Inflate to 30 psi.

Wrap with wax paper.

Wrap with duct tape.

Let sit for full cure time.

Anything I'm missing?

Views: 124

Reply to This

Sold something in our classifieds? Find this site valuable?

Consider a donation to the cause. We're cheaper than eBay fees, and it helps us here at CXM keep the lights on!

Enter any amount below, and click on the cow for some good karma. Thanks!

Amount:



Badge

Loading…

Blog Posts

Cranksgiving 2016 Is Coming Up!

Posted by R.J. Clark on November 7, 2016 at 10:43am 0 Comments

N + 1

Posted by R.J. Clark on November 3, 2016 at 9:19am 0 Comments

Wasps.

Posted by R.J. Clark on November 1, 2016 at 7:49am 0 Comments

© 2017   Created by Cyclocross Magazine.   Powered by

Badges  |  Report an Issue  |  Terms of Service