Cyclocross Magazine

Cyclocross Community, Forums, Classifieds, Photos and Videos

If anybody has used any of IRD CX , road or MTB Components please let me know your opinion about their stuff.

Thanks

Views: 92

Reply to This

Replies to This Discussion

I have their long drop cable hanger ($35.00 was too much to pay) works well but you can get a less expensive one from Cyclocrossworld.com now. And I use the 10spd cassettes on my CX bikes. I went with them originally because I could get them with a 28t cog in the back. But now you can get that size from SRAM, and Shimano. But I think IRD's stuff works well overall. A lot of their products are good solutions to unique or hard to solve problems. Especially if your trying to set up a CX bike that is pieced together.
IRD 12-32 cassette for campy! What a great spread for a single ring setup! Raced it last year and this year have bought a second cassette for the spare wheel set! Fit is great especially given I use campy and it has issues normally with anything other than campy...Shifts fine with a med cage...Would recommend for any single ring set up...I use a 42x 12-32...Climb vertical and pound out on the flats!

RSS

Sold something in our classifieds? Find this site valuable?

Consider a donation to the cause. We're cheaper than eBay fees, and it helps us here at CXM keep the lights on!

Enter any amount below, and click on the cow for some good karma. Thanks!

Amount:



Badge

Loading…

© 2024   Created by Cyclocross Magazine.   Powered by

Badges  |  Report an Issue  |  Terms of Service