I rolled the tubular off the front wheel racing today. Is it possible to clean the tire and rim and remount? I know how to prep the rim, any advice on cleaning the tire.
Permalink Reply by Mike Shaw on November 19, 2012 at 3:14pm
Permalink Reply by Minor Baker on November 19, 2012 at 5:42pm first time I cleaned the rim, I use the GooGone gel (rookie mistake) but I expect that some got in the spoke holes and leaked back out once the tire was glued on the first time. This would have weakened the glue and then a good hard crash took care of the rest.
remounted and raced it this weekend, and it worked great.
Sold something in our classifieds? Find this site valuable?
Consider a donation to the cause. We're cheaper than eBay fees, and it helps us here at CXM keep the lights on!
Enter any amount below, and click on the cow for some good karma. Thanks!
Posted by Paul Warloski on April 29, 2013 at 5:46pm 0 Comments 0 Likes
Posted by Dennis Meyer on March 18, 2013 at 2:32pm 0 Comments 0 Likes
Posted by elgee on March 18, 2013 at 6:38am 1 Comment 0 Likes
Posted by David Mayhew on February 28, 2013 at 5:51pm 0 Comments 0 Likes
© 2013 Created by cyclocross magazine.