Cyclocross Magazine

Cyclocross Community, Forums, Classifieds, Photos and Videos

CX Training: Race Tubulars for Training or Separate Training Wheels for Training

I just purchased my first pair of CX race tubulars (Ksyrium Tubulars).  Since they are strong, I could use them as a train/race wheel.  I was curious if most people trained on their race tubulars or just trained on training clinchers with cheaper tires.  Since the tubular tires are expensive, I can see why someone would have separate training/racing wheels.  However, I'm not sure how much my Grifo Challenge tubulars would wear down from once or twice a week training for 1 hr during an 8 week season.  What do most people do who own race tubulars?  Do you have separate training clinchers or just train in tubulars since the wear isn't that much?

 

- Dave

Views: 266

Reply to This

Replies to This Discussion

Most people around here use tubeless training wheels. Of course that is because Colorado is full of sharp stones and goat head thorns. Anything other than tubeless is suicide.

For racing you're on expensive tubulars and even if you have sealant in there, you really don't want to train on those expensive tires and flat them. It's not about wearing down the tread, it's a matter of not cutting a sidewall, or puncturing and having to replace an $80-150 tire...
It depends on your training, I race tubulars and have clincher pit/training wheels. For cross only workouts where I am working on handling skills and will not be riding anywhere with thorns or other nasties I ride the tubulars for practice, for workouts with a lot of road or on trails I ride the clinchers
I train on clinchers and race on tubulars. For me it isn't worth the chance of flatting a tubie while training Saturday and not being able to race it Sunday. Some folks say you should train on what you will race so you know how they will handle, but the terrain I train on in dry Bend Oregon is different than most of my races in wet Portland.
One more reason to roll on Tufo! I've been using my Tufo tubular wheels for a weekly race-pace training sessions then racing them on the weekends for a couple of years now. I've got a bottle of stan's at the ready, but it has not yet been required. There is certainly something to the idea that you need to learn where the limits of the tire is during training (much farther than you think, usually!). For true MTB terrain I bust out the bomber wheels, but for everything else it's the Tufos. I also think there is something to be said for getting the bugs shook out of a particular set up under race-like conditions. It also saves time because you're not always readjusting rear derailleurs and caliper spacing.

PS - I would not recommend using Dugast for training/race tires as the construction will only get you through a limited amount of rides. Come race day they are pretty sweet though.
Hmm. I think it really depends on where you are training at. I think we can all agree that tubular tires will feel and react different to a clincher- that's why we ride them. If you only use them for racing you won't know what to expect. It also gives you more practice using them at different air pressures. This is an important thing to do for someone trying tubulars for the first time/season. Try them in different situations at slightly different air pressure to see what works best for you. Race day is not the appropriate time for that. In the end though be careful where you use them. Changing tires mid season is a pain. Good luck.

RSS

Sold something in our classifieds? Find this site valuable?

Consider a donation to the cause. We're cheaper than eBay fees, and it helps us here at CXM keep the lights on!

Enter any amount below, and click on the cow for some good karma. Thanks!

Amount:



Badge

Loading…

© 2024   Created by Cyclocross Magazine.   Powered by

Badges  |  Report an Issue  |  Terms of Service