Where can I buy adhesive cable guides to go on a front carbon fork (to attach the front disc brake cable w. zip-ties)? Also, separate question: when I tie the continuous cables to the CX frame with zip ties; how can I make these cable ends safe? Now they are like 12 separate little black knives. Do I cut them flush with a razor blade, or melt the end with a lighter?
Tags:
Are you referring to these?
http://www.ebay.com/itm/Jagwire-Alloy-Stick-On-Guides-w-C-Clips-Bla...
You can also cut them flush.They will not separate unless you use the cheap zip ties from the dollar store.
Sold something in our classifieds? Find this site valuable?
Consider a donation to the cause. We're cheaper than eBay fees, and it helps us here at CXM keep the lights on!
Enter any amount below, and click on the cow for some good karma. Thanks!
Posted by Emma stone on March 16, 2018 at 9:00pm 0 Comments 0 Likes
Posted by Mike Macdonald on December 21, 2017 at 11:24am 0 Comments 0 Likes
Posted by R.J. Clark on November 7, 2016 at 10:43am 0 Comments 0 Likes
Posted by R.J. Clark on November 4, 2016 at 9:43am 0 Comments 0 Likes
© 2024 Created by Cyclocross Magazine. Powered by