Cyclocross Magazine

Cyclocross Community, Forums, Classifieds, Photos and Videos

Anyone have troubles with the inner spring rubbing against the pedal body? As a result, the spindle won't spin.   I can grind away at the spring or body but would rather not if there is a fix?

 

Any info would be appreciated.

 

Views: 151

Reply to This

Replies to This Discussion

Buy a better pedal then Crank Bros. I can't stand those things.
Like what?
Most likely, the problem is in the bearing or the bushing, Depending on the year of your pedal, you should be able to get a rebuild kit for it for around $30 or so. (for both pedals) I have been running Crank Bro for about 10years now & have NEVER had a spring cause a problem. They are super easy to rebuild with a 10mm socket/ratchet, flat blade screw driver, & some grease.

I did have a spring break on me once but Crank Bro's warranted it no questions asked
I'm a huge fan of Shimano SPD, particularly XTR. The coating they put on the hardware of the pedal is significantly better then the lesser models. I know this is a very personal preference subject, and I know many people like Crank Bros. Yes they are easy to rebuild, but wouldn't you rather not having to worry about doing it at all? I know someone that has first generation XTR pedals. About ten years old now. They are still kicking and have never been rebuilt. Just my $.02
Brand new pedals. Raced on twice and the spring shifted over and the end is getting caught on the platform.

RSS

Sold something in our classifieds? Find this site valuable?

Consider a donation to the cause. We're cheaper than eBay fees, and it helps us here at CXM keep the lights on!

Enter any amount below, and click on the cow for some good karma. Thanks!

Amount:



Badge

Loading…

© 2020   Created by Cyclocross Magazine.   Powered by

Badges  |  Report an Issue  |  Terms of Service