Cyclocross Magazine

Cyclocross Community, Forums, Classifieds, Photos and Videos

Im trying to decide what brakes to put on my cannondale optimo,its got the stock heavy cannondales on it now,I know the pauls are great but im racing on a budget.Any suggestions?

Views: 82

Reply to This

Replies to This Discussion

hi gary, welcome.

are you looking to replace the stock ones to save weight? or for better braking? more clearance? lots of recommendations, and we have a ton of content on this in our next issue, Issue 7, including pads, setup, and brake reviews.
better braking and clearance not really worried about the weight.
well, here's the thing - i think you have a low-profile brakes, right? so if you want better braking you can either adjust those or change the pads or perhaps replace them, but if you want more clearance, you'll most likely get less power in your braking.

for low profile on a budget, the new avids are pretty nice as are the shimanos and both are easy to set up and can be quite powerful. but they're not huge on clearance.
I was considering the avids my brakes may not be adjusted correctly but the pads seem to be in good shape,they are also stock that came on my bike in 2006.thanks for your advice and by the way i just subscribed to cx mag,when will the #7 issue coming out.
I know you're not going to want to hear this but if you put a great set of pads on those tektro/cannondale brakes, they actually work very well.

That said, I replaced mine with PAULs but will be using the cannondale/tektro jobs on my old-skool single speed set up.
Actually that not bad news,I think ill get a good tune up and do some adjusting then get some good pads.I rode my bike today and the brakes didnt work very good and i had to pull the lever almost to the bar, seemed weird after riding my mtn bike with discs all yr.
Get some Kool Stop salmon pads (file off the lip on them). Get news cables and housing at least. If you really trust your mechanic have them ditch the stock straddle cable/hanger. Get an old school hanger and set it up so it's three fingers above the tire and adjust the straddle cable accordingly.

The arms themselves are really a minimal part of the equation. All the "cantilever" breaks have about the same mechanical advantage. The high profile (TRP, Spooky, etc) brakes have better clearance but have way less mechanical advantage. That's just a matter of physics.
The Kore brakeset also looks pretty nice, light, cheap and they seem to provide a fair amount of stopping power to the rims.

RSS

Sold something in our classifieds? Find this site valuable?

Consider a donation to the cause. We're cheaper than eBay fees, and it helps us here at CXM keep the lights on!

Enter any amount below, and click on the cow for some good karma. Thanks!

Amount:



Badge

Loading…

© 2022   Created by Cyclocross Magazine.   Powered by

Badges  |  Report an Issue  |  Terms of Service