Cyclocross Magazine

Cyclocross Community, Forums, Classifieds, Photos and Videos

Having trouble setting up my x9 rear long cage with force shifters and a shimano 11-28 cassette. Put an XT cassette on and shifted great any help please 

Views: 232

Reply to This

Replies to This Discussion

What's the problem?
Not dropping down into 11t gear. And when it does trying to go up one it skips
Did you use a spacer behind the cassette?
Yes
Did you adjust the H/L limit or B screws (6mm between top pulley wheel and largest cog) when you swapped cassettes?

It sounds like either a crimped cable/dirty housing, a bent hanger or misaligned limit screw, but the kicker is that the shifting improves with the XT cassette.

What about the chain? Did it wear with the XT cassette? I have a old SRAM 11-28 cassette and 1091R chain that will only work when paired together and nothing else.

What are the differences between the 11-28 and the XT cassette?

What about the freewheel? Is it loose (movable side to side)? Are the bearings and pawls happy?

Very interesting problem.

are you using the lockring that came with the 11-28 cassette?  if you're using the one from the XT cassette, and it had a 12t low cog, that might be your problem - if it is, you just an lockring for an 11t cog.

RSS

Sold something in our classifieds? Find this site valuable?

Consider a donation to the cause. We're cheaper than eBay fees, and it helps us here at CXM keep the lights on!

Enter any amount below, and click on the cow for some good karma. Thanks!

Amount:



Badge

Loading…

© 2024   Created by Cyclocross Magazine.   Powered by

Badges  |  Report an Issue  |  Terms of Service