help me

Replies to This Discussion

Permalink Reply by andrew on March 17, 2009 at 2:46pm

hey - unless you have a steel frame set to 132.5 mm spacing, or want to spread the dropouts wide, or change an axle, the XTR rear hub likely won't fit your 'cross bike. mtn spacing is 135, road 130. the DA hubs will hold up fine - they're sealed well, and the freehub is sealed better than many aftermarket units.

good luck!

• ▶ Reply

Permalink Reply by jeremiah blume on March 17, 2009 at 3:44pm

thanks for you advice

• ▶ Reply

Permalink Reply by brianhancock on March 17, 2009 at 5:19pm

I'll second the durability for D.A. hubs...mine have been awesome after years of road and 'cx mileage.

• ▶ Reply

Permalink Reply by GeWilli on March 18, 2009 at 7:02am

if you need a third I'll add it - can't beat DA hubs... they've always been among the best if not the best by a good margin...

• ▶ Reply