I recently got a Giant cx bike, and I'm having a ton of fun on it. It has a 12-28 (shimano 105) cog set, and 36 26 chainrings. While I hope to race, I am riding this bike for fitness. Along with mtb trails here in Lake Tahoe, I also want to add some long road climbs to get strong (and I like it).
I just met my match on a climb called Gates Canyon. I was told the grade is over 20%. I want gearing to enable my to ride the whole thing.
What cogs can I set up on this bike?
You sure those chainring numbers are accurate? Typically CX bikes come with a 46/36. Only way you are getting a 26 on the front is if you have a MTN double crank. It would also give you less than a 1:1 ratio as your lowest gear (26f/28r), which is pretty darn low.
Assuming you have a 46/36, you could potentially go to a larger rear cassette (12-32) if the rear mech will accommodate it. Or you could get a 34f chainring, or potentially both. If you want smaller than a 34f ring, you'll have to swap out the crank to a MTN double.
Or you can just gut it out and watch your progress as you get better and better at climbing.
Thanks Kris. I'm sure you're correct about the chainrings. I will probably start with the 12-32 and see how that goes. i live in the mountains, so i climb on every ride. I just want to start doing some notoriously steep road climbs as part of my travels. I'm just looking for that "extra gear" when the road goes above 12-15%.
Thanks again for the input.
© 2023 Created by Cyclocross Magazine. Powered by