Cyclocross Magazine

Cyclocross Community, Forums, Classifieds, Photos and Videos

Hi all I could use some product research help.

Would you buy a device that would hold your pump chuck on when you’re pumping up your tires?

I know with deep wheels it’s harder to keep the chuck on, and with a crack pipe it’s hard to keep the chuck on over 100psi, and would you spend $5+ on it?

Thanks for the help.

Dan…

 

 

Views: 64

Reply to This

Replies to This Discussion

http://www.silcapompe.it/pop_40.0.htm

Problem solved. Works with most disc wheels too.

Why are you pumping your cross tires to 100psi?
thanks Katsu
but that will not fit i an H3!
Dan...
I would use something like that for my cars and my truck, The other day I ran across a driver that had a neat setup to air up his tires with air chucks that would lock on to the stem, he said it had some sort of lock ring inside the chuck to hold on to the stem.
The chuck has a duel feed used mostly for big trucks with duel wheels
Never had a problem with the chuck staying on in 20yrs of riding and 8yrs of shop wrenching.....

RSS

Sold something in our classifieds? Find this site valuable?

Consider a donation to the cause. We're cheaper than eBay fees, and it helps us here at CXM keep the lights on!

Enter any amount below, and click on the cow for some good karma. Thanks!

Amount:



Badge

Loading…

© 2022   Created by Cyclocross Magazine.   Powered by

Badges  |  Report an Issue  |  Terms of Service