Single ring set-up

Replies to This Discussion

Permalink Reply by DStudley on February 17, 2011 at 1:50pm

Most people that I have ridden with have gone the route of using the normal shifter without running any cable.  Those that are weight conscious gut the shifter of the internals.

• ▶ Reply

Permalink Reply by Christopher Plummer on February 17, 2011 at 4:29pm

I did the whole gutting internals thing once, and when all was said and done, I didn't see the point.  It didn't buy you anything worth the effort.

• ▶ Reply

Permalink Reply by Chris Mayhew on February 17, 2011 at 4:04pm

Yeah, you can totally do that. For years I ran that setup with a locked out front der. That worked but is really unforgiving of bad technique. And there are a plethora of chain keeper options out there now.

• ▶ Reply

Permalink Reply by Joe B on February 19, 2011 at 2:53pm

I ran a single ring up front last season and just didn't hook up the cable to my 105 shifter. No problems at all.

• ▶ Reply

Permalink Reply by Surly Bastard on February 20, 2011 at 1:13pm

Just buy or find a leftover brake lever for SS or time trial, they're dirt cheap. I picked one up for under $10. I think that's what the majority of people running single rings do. A big advantage of running a single ring is getting rid of the heavy left shifter. Gutting a shifter seems like a lot of trouble, and then it's not as easy to just lob it back on and turn your rig back into a double.

• ▶ Reply