Tags:
I successfully used a 105 Hollowtech crankset and 2mm of spacers on the driveside on a steel Voodoo Wazoo with a 68mm English shell. I was fine tuning a SS chainline.
That's what I was hoping to hear. Just wanted to make sure the spindle would be long enough to allow a mm or two. Thanks!
not sure if you saw but you got a bunch of responses on facebook too: http://www.facebook.com/Cyclocross/posts/10150383427537092
Sold something in our classifieds? Find this site valuable?
Consider a donation to the cause. We're cheaper than eBay fees, and it helps us here at CXM keep the lights on!
Enter any amount below, and click on the cow for some good karma. Thanks!
Posted by Emma stone on March 16, 2018 at 9:00pm 0 Comments 0 Likes
Posted by Mike Macdonald on December 21, 2017 at 11:24am 0 Comments 0 Likes
Posted by R.J. Clark on November 7, 2016 at 10:43am 0 Comments 0 Likes
Posted by R.J. Clark on November 4, 2016 at 9:43am 0 Comments 0 Likes
© 2024 Created by Cyclocross Magazine. Powered by