Cyclocross Community, Forums, Classifieds, Photos and Videos
Sram force/red shifter compatibility
I'm thinking about moving parts around from bike to bike since my Dura Ace STI levers are getting pretty old and sheisty feeling. I have some SRAM red 9 speed shifters laying around and was wondering if they work with SRAM XO or XX 9 speed deraileurs. I'm asking because I'd liek to run an 11-32 cassette and the Force deraileur doesn't work past a 26 or 27 tooth gear. Any feedback appreciated.
Replies to This Discussion
-
Permalink Reply by David Thomas on
-
Might want to double check... do you mean 10spd?
-
-
Hi Noah,
SRAM Red has always been a 10 speed group. It is completely compatible with XO and XX derailleurs and cassettes. The only problem you may have is chain rub on your front derailleur. Your Force derailleur should work with that cassette as SRAM now offers a Red rear derailleur to work with the 11-32 cassette. They call if WiFli. There are no special front derailleurs necessary for the WiFli option.
Good Luck, Doug
-
-
Yes, they are indeed 10 speed. Thanks for the info.
Sold something in our classifieds? Find this site valuable?
Consider a donation to the cause. We're cheaper than eBay fees, and it helps us here at CXM keep the lights on!
Enter any amount below, and click on the cow for some good karma. Thanks!
Badge
Top Content
Blog Posts
6 Scenic Cycling Trails Around Singapore For People Who Hate Jogging
Posted by Emma stone on March 16, 2018 at 9:00pm 0 Comments 0 Likes
35 mm CX rule
Posted by Mike Macdonald on December 21, 2017 at 11:24am 0 Comments 0 Likes
Cranksgiving 2016 Is Coming Up!
Posted by R.J. Clark on November 7, 2016 at 10:43am 0 Comments 0 Likes
I want to be old, so I can kill people.
Posted by R.J. Clark on November 4, 2016 at 9:43am 0 Comments 0 Likes
© 2024 Created by Cyclocross Magazine.
Powered by
