Hi folks,
I'm moving out to Oz in a couple of months time and had my first season cx in Ireland last year.
Irish courses tend to be pretty muddy with occasional paved bits, in around forests and ground can be pretty slippy. Or else it's full on peanut butter glue type mud.
So my current setup is pretty much for mud, as anything else is the exception! Running tufo cubus on some 303's.
Having a look at some vids and things from CX races around Sydney it looks to be pretty dry, maybe sandy, loose over hard type thing. What sort of tyre profile works best for this type of surface?
I have some racing ralph ht tubs that I got free with a bike I got that I was going to use this year in earlier drier races, but perhaps they are not suitable at all? Best to sell them and get something else?
Looking for some advice,
Thanks
Marty
Tags:
Racing Ralphs work well I use them (clinchers) on both my mtb & cross bike around sydney. Your description is pretty bang on, with rocky thrown in.
& Just incase you hadn't found us yet, check https://www.facebook.com/CyclocrossOz for all Australian CX happenings (things are really just starting to take off) and http://www.mwmtb.com for Sydney
Hi Rob,
I'll check it out! Looks like the CX scene is definitely starting to take off. Is there much racing in summer season?
I should be based in Sydney so will check out that link too.
Thanks!
Sold something in our classifieds? Find this site valuable?
Consider a donation to the cause. We're cheaper than eBay fees, and it helps us here at CXM keep the lights on!
Enter any amount below, and click on the cow for some good karma. Thanks!
Posted by Emma stone on March 16, 2018 at 9:00pm 0 Comments 0 Likes
Posted by Mike Macdonald on December 21, 2017 at 11:24am 0 Comments 0 Likes
Posted by R.J. Clark on November 7, 2016 at 10:43am 0 Comments 0 Likes
Posted by R.J. Clark on November 4, 2016 at 9:43am 0 Comments 0 Likes
© 2024 Created by Cyclocross Magazine. Powered by