Cyclocross Magazine

Cyclocross Community, Forums, Classifieds, Photos and Videos

White Industries Eno Rear Wheel(s) for Fixed Gear or Single Speed

Hello! I have a White Industries Eno hub 130mm width laced 3x to a CXP33, velox rim tape and 15t Fixed cog. Wheel is in fantastic condition. This wheel is perfect for converting a standard width (130mm) vertical drop road/cyclocross frame for Singlespeed use.

I have recently replaced the bolts that hold the wheel to the frame so they have a fresh new surface. If you have any questions please feel free to email me!

I have a matching front wheel laced to a Suzue track hub. The hub is however pitted and will need to be replaced. That being said the rim is in perfect condition and you can just swap it onto a functional hub.

I'm located in Brighton, MA and can be reached at if your're interested. Thanks!

Views: 337


Reply to This

Replies to This Discussion

This is the eccentric hub? So you can use it with any 'normal' 130mm spaced frame?

Yup it will work on any "normal" spaced road/cross frame.


Sold something in our classifieds? Find this site valuable?

Consider a donation to the cause. We're cheaper than eBay fees, and it helps us here at CXM keep the lights on!

Enter any amount below, and click on the cow for some good karma. Thanks!




© 2023   Created by Cyclocross Magazine.   Powered by

Badges  |  Report an Issue  |  Terms of Service