Cyclocross Magazine

Cyclocross Community, Forums, Classifieds, Photos and Videos

I am looking for either some 32 hole 700c tubular rims or a complete wheelset, Shimano compatible. 

Views: 642

Reply to This

Replies to This Discussion


I have a wheelset. Brand new, just laced up. 3x lacing rear. 2.0-1.8 DT swiss spokes in rear with alternating 12mm and 16mm (drive side nipples) brass nipples.

3x lacing front 1.8 DT swiss spokes with 12mm brass nipples.

Hubs are velocity road disc hubs. shimano. 130mm rear spacing and 100 front spacing

rims are sun ringle tubular

gommatalia tubular tires 32c front and rear with great life

glue is okay.

Built up, just for the sake of building up. 300.00 plus shipping.

I don't have 32-hole, but am selling a pair of slightly used Easton EA70x tubulars (Shimano compatible). Tubulars are glued on - front is a Vittoria Cross EVO XM and the rear is a Challenge Grifo. Both were used for less than one season. Let me know if you are interested. Easton wheel info here:


You can contact me at scottmreeves2000atyahoodotcom.

do you still have these wheels?
send me a message,
I have found a wheelset, thanks for the offers.


Sold something in our classifieds? Find this site valuable?

Consider a donation to the cause. We're cheaper than eBay fees, and it helps us here at CXM keep the lights on!

Enter any amount below, and click on the cow for some good karma. Thanks!




© 2023   Created by Cyclocross Magazine.   Powered by

Badges  |  Report an Issue  |  Terms of Service