Cyclocross Magazine

Cyclocross Community, Forums, Classifieds, Photos and Videos

im thinking about picking up a gear cyclocross bike. is there an advantage or disadvatage with a 9 speed or should i go 10.
any bike recommedation

Views: 9

Replies to This Discussion

SRAM all the way, which means 10sp. Of course, I'm a bit biased ;-)
I went to SRAM Rival last year. Best decision I ever made. I have used bar-end shifters, and Shimano STI (8 and 9) and the SRAM stuff is fool proof. I highly recommend it. I run a 38/48 on the front and 11-28 on the back. I have yet to find a course where I ran out of gearing.

BTW, yesterday I bent the right brake blade (lever) in a crash (long story). I was able to order up a new blade as opposed to Shimano where I would have needed a whole new lever. That in itself is AWESOME!

With SRAM coming out with carbon for the Rival, you can probably find some aluminum Rival on ebay cheap.

Good luck
I go 9 since I feel that the 10 speed is just so closely spaced that there may be a higher chance of things getting gunked up during muddy races. Since there is more play in 8 or 9 speed drivetrains, I feel thay they hold an advantage over the 10speed stuff. Just my 2 cents.
SuperTick, I hear you, but after a year + on 10sp, I found my fears to be unfounded. The 10sp gets clogged just like 9 when there's a leaf in the cassette, but other than that, it hasn't been a problem.

I run a single 42 up front, and it's nice to run a gutted Rival lever to match the rear lever, as opposed to a separate Cane Creek or the like.
And of course 10 is one more than 9
The more and more I race cross the more I realize how few gears I need. Being fast in the transitions and having your race be as flaw free as possibleis more important than whether your are riding a 9 or 10. This year I have switched to a 40 up front with a 12-27 in the rear. I find that my racing is much more fluid. I watch many riders fumbling between the big and small ring and it costs them time/energy/places. I do have another bike with the standard 38/46 if the course requires such. Let's put it this way, I have been on the podium many more times this year with the single ring.
cxchiva -- the choice to run single up front is a different discussion than with 9 or 10sp. Either way, in my opionion, single up front is superior -- less weight, fewer chances of screwing things up.

If that's part of the consideration, by the way, 10sp works well with single up front, although 9 gives you a bit of room for slop on the chainline/derailleur set up.
Hey, if one of them get mucked up he has another one to rely on!

RSS

Sold something in our classifieds? Find this site valuable?

Consider a donation to the cause. We're cheaper than eBay fees, and it helps us here at CXM keep the lights on!

Enter any amount below, and click on the cow for some good karma. Thanks!

Amount:



Badge

Loading…

© 2022   Created by Cyclocross Magazine.   Powered by

Badges  |  Report an Issue  |  Terms of Service