Cyclocross Magazine

Cyclocross Community, Forums, Classifieds, Photos and Videos

Hey everyone,

Quick question about Brake pads, and if there are any that are cross specific.

I have TRP Euro-x brakes and aluminum wheels. After some research it looks like you can buy pads specific to wet/dry/wheel make ect...

I just purchased some Dura Ace R55C pads. The package says "works well in dry" Should I return these or is there really no difference?

THANKS!

Views: 4049

Reply to This

Replies to This Discussion

Are you using carbon rims? Swiss stop yellow.

 

 Otherwise get the Kool Stop salmon pads. File the lip off them. Best pads you will ever buy, esp for the money. The green Swiss stops are about as good, not quite as grabby, but don't last nearly as long.

 

If you can return those pads (say a local shop) I would. If you can't don't sweat it. It's not like pads last that long in 'cross!

Kai,

Grab Cyclocross Magazine Issue 7 (avail print or digital) for a bunch of cyclocross brake pad reviews.  There are two new ones (KoolStop CrossPad and SwissStop's new pad, along with brake power comparisons and setup tips) in Issue 14 as well.  The salmon pads now have non rim-rake option in case you don't like the plow tip and don't want to file it off the lip that's on the Dura - it's the Dura2 pad. There are multi-condition pads available as well. 

 

Shimano's pads are well-regarded and often the standard others measure their pads against, but the big downside is that they do eat the metal of rims. So long-term your rims may wear a bit faster. 

 

 

I'm with Chris - I too am a big fan of Kool-Stop's salmon pads. They've been the biggest difference on all of my brakes. And the Shimano pads tend to pick up grit and grind away your rims, like Andrew mentioned.
I can't speak on the Shimanos, but Tektros stock pads picked up grit and it would get aluminum chips embedded in them. They were very hard and plasticy. The Salmon KoolsStops really increased my braking power and hold up well. I do want to try the new CrossPads, but I'm not rushing out to replace my old plain salmons.
Swiss Stop RED all the way! They are durable, carbon and alloy compatible - perfect for those mid race wheel changes - and I only used two sets all season in mud, grub, grime, and gnarliness. Expensive, but worth it IMHO...
I would be super careful in swapping carbon and alloy wheels without swapping pads due to embedded metal in the pad that can eat a carbon rim.
If you are using carbon wheels for cross, the small amount of metal left in the pad is the least of your worries.
Elaborate on this comment ... What are the bigger worries?

The sand/mud/rocks/grass/blood/bone/hair between your pads and your carbon rims as-well-as any embedded pieces of aluminum from the aluminum rims that you just switched out. 

"LIKE"

how have you been enjoying the salmon pads?

As the season went on and the courses here in New England got wetter and muddier I did feel that I had better stopping power with the salmons. With several big names companies coming out with Disc brake XC bikes this year; that might be the BEST way to go for sure.

RSS

Sold something in our classifieds? Find this site valuable?

Consider a donation to the cause. We're cheaper than eBay fees, and it helps us here at CXM keep the lights on!

Enter any amount below, and click on the cow for some good karma. Thanks!

Amount:



Badge

Loading…

© 2024   Created by Cyclocross Magazine.   Powered by

Badges  |  Report an Issue  |  Terms of Service