Cyclocross Community, Forums, Classifieds, Photos and Videos
Adding a barrel adjuster to TRP Euros, DIY style?
Thanks.
Replies to This Discussion
-
Permalink Reply by Lane Miller on
-
Hey Chris, I did this not by tapping the pinch bolt side, but tapping the fixed side of the straddle cable. Threaded it to accept an STI-style barrel adjuster. I would note though that the first straddle cable I had in there was a tight fit, and so it eventually seized in the barrel adjuster, so turning the adjuster torqued the cable head as well, not-so-useful... So I now use a cable with a slightly smaller button/head and make sure to put a touch of grease in there as well, and bingo... Hope that helps some!
Sold something in our classifieds? Find this site valuable?
Consider a donation to the cause. We're cheaper than eBay fees, and it helps us here at CXM keep the lights on!
Enter any amount below, and click on the cow for some good karma. Thanks!
Badge
Top Content
Blog Posts
6 Scenic Cycling Trails Around Singapore For People Who Hate Jogging
Posted by Emma stone on March 16, 2018 at 9:00pm 0 Comments 0 Likes
35 mm CX rule
Posted by Mike Macdonald on December 21, 2017 at 11:24am 0 Comments 0 Likes
Cranksgiving 2016 Is Coming Up!
Posted by R.J. Clark on November 7, 2016 at 10:43am 0 Comments 0 Likes
I want to be old, so I can kill people.
Posted by R.J. Clark on November 4, 2016 at 9:43am 0 Comments 0 Likes
© 2024 Created by Cyclocross Magazine.
Powered by
