Cyclocross Magazine

Cyclocross Community, Forums, Classifieds, Photos and Videos

So as I scrambled back to the car right before call-ups today to readjust my front brake, I remembered that some have added a regular old barrel adjuster to the Euro X style cantis. After some searching, I have found the kit from Tektro at ~$30. I have two regular adjusters and lots of time. What's the best DIY method for this? Drill and tap the round pinch bolt? Or is there a way to mount just above the stem hanger? Pics would be great, I have searched for a while and can't find anything on the site or google.

Thanks.

Views: 131

Reply to This

Replies to This Discussion

Hey Chris, I did this not by tapping the pinch bolt side, but tapping the fixed side of the straddle cable. Threaded it to accept an STI-style barrel adjuster. I would note though that the first straddle cable I had in there was a tight fit, and so it eventually seized in the barrel adjuster, so turning the adjuster torqued the cable head as well, not-so-useful... So I now use a cable with a slightly smaller button/head and make sure to put a touch of grease in there as well, and bingo... Hope that helps some!

RSS

Sold something in our classifieds? Find this site valuable?

Consider a donation to the cause. We're cheaper than eBay fees, and it helps us here at CXM keep the lights on!

Enter any amount below, and click on the cow for some good karma. Thanks!

Amount:



Badge

Loading…

© 2020   Created by Cyclocross Magazine.   Powered by

Badges  |  Report an Issue  |  Terms of Service