Cyclocross Magazine

Cyclocross Community, Forums, Classifieds, Photos and Videos

Hey All,

As I get the steed ready for my first race of the season in a couple of weeks I was debating what gearing to use. I currently run stock gearing on my Gary Fisher cross bike (11-26 and double chain ring up front). I was thinking of chaining to 12-28 and single ring (42 to 46) up front. What are your thoughts. I race in New England.

Views: 386

Reply to This

Replies to This Discussion

If you can push a 46 single I say go for it, but be warned - you better have tree trunks for legs!  What cain rings are you currently running on your double setup?     

I have a 36 single up front and a 11-28 cassette

42t is reasonable.  I also race in New England and have all the high/low gear I need for our courses, but i run a 30t cog in the back. 

It depends on what your courses are like and knowing what gearing will be optimum. I liked the single ring and raced it one year but I also found it to be limiting as well and have stuck with a double since. If you are going to go for it I would suggest a 42 up front. Make sure you shorten your chain by a link or two, a chainring outer guard and some kind of chain watcher otherwise it will come off.

RSS

Sold something in our classifieds? Find this site valuable?

Consider a donation to the cause. We're cheaper than eBay fees, and it helps us here at CXM keep the lights on!

Enter any amount below, and click on the cow for some good karma. Thanks!

Amount:



Badge

Loading…

© 2019   Created by Cyclocross Magazine.   Powered by

Badges  |  Report an Issue  |  Terms of Service