Cyclocross Magazine

Cyclocross Community, Forums, Classifieds, Photos and Videos

I'm looking to build new wheels. i have chosen cxp33 mavics, and does anyone have wisdom on dura-ace or xtr. i found a great deal on a wheel set with cxp33 and dura ace, but will the hubs hold up to the dirt/mud? any help would be great.

Views: 40

Reply to This

Replies to This Discussion

hey - unless you have a steel frame set to 132.5 mm spacing, or want to spread the dropouts wide, or change an axle, the XTR rear hub likely won't fit your 'cross bike. mtn spacing is 135, road 130. the DA hubs will hold up fine - they're sealed well, and the freehub is sealed better than many aftermarket units.

good luck!
thanks for you advice
I'll second the durability for D.A. hubs...mine have been awesome after years of road and 'cx mileage.
if you need a third I'll add it - can't beat DA hubs... they've always been among the best if not the best by a good margin...

RSS

Sold something in our classifieds? Find this site valuable?

Consider a donation to the cause. We're cheaper than eBay fees, and it helps us here at CXM keep the lights on!

Enter any amount below, and click on the cow for some good karma. Thanks!

Amount:



Badge

Loading…

© 2019   Created by Cyclocross Magazine.   Powered by

Badges  |  Report an Issue  |  Terms of Service