Cyclocross Magazine

Cyclocross Community, Forums, Classifieds, Photos and Videos

I have some tires that I pulled off of some wheels a while ago. The tires are still in good condition and I have just became an owner of some new to me wheels (i.e. used).

There is still glue on the base tape, and I currently am stretching them. I was planning on putting a layer of glue on the rim, letting it dry for 24 hrs, and then one more layer and then the tire.

Anyone doing something different?

The glue on the base tape is clean (no dirt) with little buildup, and the rim also has little buildup.

Views: 22

Reply to This

Replies to This Discussion

No problem with gluing tires up for 'cross with your current set up. Your current plan seems appropriate as long as everything is clean. If you're not using tubular tape, just make sure your timing is good for that last glueing between the rim and tire (more on that at the links below).

I did a post with the Staten Cross race here in New York recently walking you through gluing up the tubulars for cyclocross. You can check it out here: Time to Glue the Tubies, Staten CX

If you have some questions, add it to the discussion at our Facebook discussion board here: http://www.facebook.com/topic.php?uid=12983926123&topic=6153

Good luck!

RSS

Sold something in our classifieds? Find this site valuable?

Consider a donation to the cause. We're cheaper than eBay fees, and it helps us here at CXM keep the lights on!

Enter any amount below, and click on the cow for some good karma. Thanks!

Amount:



Badge

Loading…

© 2019   Created by Cyclocross Magazine.   Powered by

Badges  |  Report an Issue  |  Terms of Service