Cyclocross Community, Forums, Classifieds, Photos and Videos
Reverse brake lever setup on Ridley X Fire
What has everyone else done?
thx,
Nathan
Replies to This Discussion
-
Permalink Reply by Nathan Masek on
-
Ok, for all of you post-watchers and Ridley riders out there who are seemingly running your brakes in the stock manner, here's what I did to switch them (it was actually quite easy). I simply re-ran the brake lines and switched the rear derailleur and the rear brake outers that run inside the top tube, then crossed them over under the seat stay like so:
- Attachments:
-
-
IMG_2328.jpg, 1.8 MB -
IMG_2329.jpg, 2.4 MB
-
Sold something in our classifieds? Find this site valuable?
Consider a donation to the cause. We're cheaper than eBay fees, and it helps us here at CXM keep the lights on!
Enter any amount below, and click on the cow for some good karma. Thanks!
Badge
Top Content
Blog Posts
6 Scenic Cycling Trails Around Singapore For People Who Hate Jogging
Posted by Emma stone on March 16, 2018 at 9:00pm 0 Comments 0 Likes
35 mm CX rule
Posted by Mike Macdonald on December 21, 2017 at 11:24am 0 Comments 0 Likes
Cranksgiving 2016 Is Coming Up!
Posted by R.J. Clark on November 7, 2016 at 10:43am 0 Comments 0 Likes
I want to be old, so I can kill people.
Posted by R.J. Clark on November 4, 2016 at 9:43am 0 Comments 0 Likes
© 2024 Created by Cyclocross Magazine.
Powered by
