Cyclocross Community, Forums, Classifieds, Photos and Videos
TRP CX8.4 Brake and 23mm wide rim compatibility?
Anyone out there tried this combination?
Not sure if setting up for the wider rim(as opposed to the 19mm standard) would affect the performance of the brake when the linear are usually intolerant to adjustments outside their design brief.
Any advice?
Replies to This Discussion
-
Permalink Reply by Scott Hendricks on
-
I've run the CX9s w/ Velocity A23 rims, no problems at all. Only concession was to swap the two spacers around so that the thinner spacer was between the pad and the arm of the brake and the thicker spacer was between the arm and the nut, just the opposite of how they came out of the box. Had to do the same thing with Avid Ultimates, BTW.
-
-
Thanks for the advice Scott. Had to do the same with my current low profile canti's to work with major tom's.
-
-
I agree with Scott. I use CX9s with Zipp 303s (25mm width) with no problems at all.
-
Permalink Reply by Peter Allen on
-
I can confirm CX8.4s w/A23s with no problems as well. I didn't move any spacers...they are as they were straight out of the box.
Sold something in our classifieds? Find this site valuable?
Consider a donation to the cause. We're cheaper than eBay fees, and it helps us here at CXM keep the lights on!
Enter any amount below, and click on the cow for some good karma. Thanks!
Badge
Top Content
Blog Posts
6 Scenic Cycling Trails Around Singapore For People Who Hate Jogging
Posted by Emma stone on March 16, 2018 at 9:00pm 0 Comments 0 Likes
35 mm CX rule
Posted by Mike Macdonald on December 21, 2017 at 11:24am 0 Comments 0 Likes
Cranksgiving 2016 Is Coming Up!
Posted by R.J. Clark on November 7, 2016 at 10:43am 0 Comments 0 Likes
I want to be old, so I can kill people.
Posted by R.J. Clark on November 4, 2016 at 9:43am 0 Comments 0 Likes
© 2024 Created by Cyclocross Magazine.
Powered by
