Cyclocross Community, Forums, Classifieds, Photos and Videos
Gaining chainring clearance with BB30.
I have a Specialized Carbon Crux with a BB30 bottom bracket. I am using the adaptors that came with the frame to run a Dura Ace crankset. However this setup only allows me to run a 39t inner ring. Can I somehow space this crank 3-4mm to the driveside so I can use a 42 or 44 toothring?
Replies to This Discussion
-
Permalink Reply by andrew on
-
Michael, any bigger ring will hit the chainstays? I have a similar issue not with chainrings but with the chainring bolts. I'm curious too but haven't spent any time investigating it. Are you trying to run a single ring? If so could you mount it to the otter setting?
Let me know if you figure it out. If you're attached to the crankset you may need to do something creative. You could also move to a 73mm wide crankset (mtb) if you're set on using a 42 inner and are up for changing cranksets.
Sold something in our classifieds? Find this site valuable?
Consider a donation to the cause. We're cheaper than eBay fees, and it helps us here at CXM keep the lights on!
Enter any amount below, and click on the cow for some good karma. Thanks!
Badge
Top Content
Blog Posts
6 Scenic Cycling Trails Around Singapore For People Who Hate Jogging
Posted by Emma stone on March 16, 2018 at 9:00pm 0 Comments 0 Likes
35 mm CX rule
Posted by Mike Macdonald on December 21, 2017 at 11:24am 0 Comments 0 Likes
Cranksgiving 2016 Is Coming Up!
Posted by R.J. Clark on November 7, 2016 at 10:43am 0 Comments 0 Likes
I want to be old, so I can kill people.
Posted by R.J. Clark on November 4, 2016 at 9:43am 0 Comments 0 Likes
© 2024 Created by Cyclocross Magazine.
Powered by
