Cyclocross Magazine

Cyclocross Community, Forums, Classifieds, Photos and Videos

I had TRP 8.4 mini V brakes last year. I've just rebuild my CX bike and noticed that the front brake's spring is too weak... Is there any repair kit available?

Or... What cantilever or mini V brake do You suggest? I'm thinking about Shimano CX70, because of easy adjustment and low maintance. Or should i consider Avid?

Thanks!

Views: 1002

Reply to This

Replies to This Discussion

What is making you say the springs are too weak?  Does your fork have the traditional 3 hole canti mounts at the post?  Have you tried the lowest hole?

Yes, I've tried... but the front brakes are much more weaker than the rear.

cough mini motos cough

Sell them to me. I'll give you beer.

In all seriousness I love my 8.4s. Not sure what would cause a spring to become so much weaker. Have you used the adjustment screws on the bottom of each that are typically used to adjust centering? For example, turn them both in and you will get a great spring tension. Maybe they have backed way out? 

We've got all of the TRP parts you need.

RSS

Sold something in our classifieds? Find this site valuable?

Consider a donation to the cause. We're cheaper than eBay fees, and it helps us here at CXM keep the lights on!

Enter any amount below, and click on the cow for some good karma. Thanks!

Amount:



Badge

Loading…

© 2024   Created by Cyclocross Magazine.   Powered by

Badges  |  Report an Issue  |  Terms of Service