Looking for a non tapered 1-1/8 cantis CX fork

Replies to This Discussion

Permalink Reply by MH on September 22, 2015 at 8:20am

Hi there,

I have a new, uncut Easton EC90 canti, 1 1/8" fork that i jsut recently took off my lapierre carbon cross frame. The frame was weird in that it had both canti and disc mounts but the fork that came with hit had just canti mounts. So i bought a disc for ($$ and not easy to find) and have had this sitting around. So it was mounted but never ridden, cut or anything. Below a link to the frame/fork image

https://www.popscreen.com/prod/MTYwODc5OTcy/Lapierre-2012-Cyclo-x-C...

Still have the orginal box, booklet that it came with, expansion-nut and top cap and everything. the only thing is that its branded Laperierre so if you can move beyond that and/or paint it its a real deal easton, top of the line fork. I check the specs and it said it weight in at 450-490 but when i took it off i swear it was closer to 410-420ish (will confirm). Plus it has the warranty card which you could register it and have the Easton piece of mind that you are not on one of the low quality, risky chinese options out there.

Looking to get 175 plus 20 for shipping.

Take paypal and ship US domestic only

• ▶ Reply

Permalink Reply by Adam St. Germain on October 1, 2015 at 9:41am

Jun,

    What length steerer do you need?

I have an 1 1/8" ENVE full carbon canti fork.  Currently has a Chris King headset race on it.  

Painted brown from a custom Circle A Cycles build.

$100 plus shipping if the steerer is long enough.

• ▶ Reply

Permalink Reply by Jun Sugai on October 1, 2015 at 10:51am

The streerer needs to be 200mm - 230mm.

Do you have picts of the fork? I'm interested!

Jun

• ▶ Reply

Permalink Reply by Adam St. Germain on October 2, 2015 at 5:57am

Ah, not going to be even close on that one.  Much shorter.

Good luck.

• ▶ Reply

Permalink Reply by Tom S on October 8, 2015 at 7:09pm

How much steerer is on the fork? I'm in the hunt for the same thing as the OP

• ▶ Reply

Permalink Reply by MH on October 5, 2015 at 6:45pm

Attached,Easton ec90 . Uncut steerer. Brand new!

Attachments:

• image.jpg, 47 KB

• ▶ Reply

Permalink Reply by Tom S on October 9, 2015 at 10:36am

Still available? I'm interested!

• ▶ Reply

Permalink Reply by MH on October 9, 2015 at 11:18am

for the easton? Yes still have it. As mentioned its uncut steer (but will measure if you have a real long ST)

• ▶ Reply

Permalink Reply by Anne on October 18, 2015 at 9:09am

Did you find a fork? I've got a couple of options that might work for you.

• ▶ Reply

Permalink Reply by Jun Sugai on October 19, 2015 at 8:42am

no luck so far....

What do have for sale? I need 200mm - 230 steerer with it.

• ▶ Reply

Permalink Reply by Anne on October 20, 2015 at 6:46pm

Nearly new Enve cross, canti, 1 1/8 straight, King base plate on it.

215mm steerer $375 shipped (open to reasonable offer)

• ▶ Reply

Permalink Reply by Anne on October 21, 2015 at 9:07am

Going to adjust price on this to $325

• ▶ Reply

• ‹ Previous
• 1
• 2
• Next ›
• Page