Cyclocross Magazine

Cyclocross Community, Forums, Classifieds, Photos and Videos

Open to any and all to respond:

Pros and Cons of building my own vs buying a prebuilt singlespeed crosser.

If you suggest buying a model, what are your recommendations?

If you suggest building, I am a Cannondale fan, so that would probably (but not definitely) be the frame of choice. After that, recommendations on hubs, cranks, chain, wheels, head sets would all be very welcome. Oh, and unfortunately, money does enter the picture... unless you want to help fund the project with donated parts or cash!

Thanks.

Eric

Views: 406

Reply to This

Replies to This Discussion

Do you have a stash of parts on hand? If so, give a look at building.
If not, think about buying one already built.

OR, just start listing all the parts you'll need to build your own, and their cost. You'll son see how it will end up costing.

If you do decide to build, look at a bike with track ends or horizontal dropouts if a all possible. Then you wouldn't have to monkey with chain tenstioners. And look at the Surly/Salsa/QPB stuff if that is your route (build) as thier parts are pretty inexpensive and usually pretty stout although not necc. the lightest.
Thanks for the information. I really have depleted my inventory of bike parts in the 10 years since I left the industry, so I may try to purchase route for now. I can build my pit bike down the road! I enjoy building my bikes more than buying pre-builds, but there comes a time when time is a problem I guess. Oh, to hit the lottery and be able to open my own shop where having it pay support the family would not be the driving force of owning it...

Amen!

I too enjoy building my bikes but have realized the cost equation was working against me - my Mongoose Croix I think I swapped just about everything out except the originaly wheelset, frame/fork, brifters and seatpost. Of course that was over the course of a year, so...

Most recent I was building a bike from a frame I had and found out that groupset alone was going to be 3/4 the cost of what I could get a whole new bike with the same grouppo on it for. So I bought new.

I have continued to work on the uber-budget 'cross projects for pit bikes/winter hacks. Might end up making it a SS.

I have always built up my cross bikes, but am a packrat of parts and thus usually only need a part or two new to complete a cross bike.  My single speed setupp is a Surly CrossCheck that gets changed to a geared training bike in the non-cross season.  I like the option of horizontal rear dropouts, but it still has a hangar for the derailluer.

If you are just looking to use it for singlespeed racing there are lots of options at every price range that you would find tough to come close building.  On the other hand if you look at a full bike and start mentally adding upgrades...

RSS

Sold something in our classifieds? Find this site valuable?

Consider a donation to the cause. We're cheaper than eBay fees, and it helps us here at CXM keep the lights on!

Enter any amount below, and click on the cow for some good karma. Thanks!

Amount:



Badge

Loading…

© 2024   Created by Cyclocross Magazine.   Powered by

Badges  |  Report an Issue  |  Terms of Service