Cyclocross Community, Forums, Classifieds, Photos and Videos
Tubular glue problems
Replies to This Discussion
-
Permalink Reply by Cameron Marshall on
-
I have a big can of the Conti tubular cement and have no problems with it. It is an amber color though, so you may have gotten a bad batch.
-
Permalink Reply by Crossedup on
-
Kinda unlikely since, I ordered a new can and it looked the same way.
-
Permalink Reply by JMack on
-
Did you order from the same source? Cause you may have gotten two cans from the same bad batch.
-
Permalink Reply by Britton Kusiak on
-
From a good article.
http://www.roble.net/marquis/tubular
"Some glues work better than others in heat. Wolber tends to do better than Clement or Vittoria in hot weather whereas Tubasti is only recommend for cold conditions. Continential and Hutchinson glues are not recommend at all. 3M Fast-Tac, a popular choice years ago, is no longer recommended since its latest formulations are water soluble! Other 3M adhesives are not appropriate for this application. "
-
Permalink Reply by Echappe Equipment on
-
I also had problems with the Conti glue when we first started the rental business. I quickly moved over to Mastik One and haven't had problems since.
There is a slightly different technique for 'cross, which you may implement with your experience in the past. But, with the lower tire pressure, its a lot easier to roll the tires in a race. I created a little tutorial that SICX race reposted here: http://statencx.wordpress.com/2009/10/30/timetogluethetubies/
-
-
Thanks, that is the same process that I used (belgium tape). Mastik one is definitely superior. The rolling problems were caused by the conti glue. Plus I have a head to head comparison, since my brother was also using conti glue (but his was the amber colored) and I wasn't sure that we were going to get his tire off the rim. On the last road tire that I glued with my conti glue, I could literally pull if off the rim with minimal force and I have glued up my fair share of wheels.
-
Permalink Reply by Gemma Kernich on
-
Hi, I have exactly the same problem - in two tins.
Did you get a reply from Continental? The glue just seems to have no 'substance' in it - it dries with no 'bulk'. I reckon you could do 10 coats of the stuff and still it won't hold - it's just not sticky!
My tins had the same batch number underneath...
-
Permalink Reply by Eric Nelson on
-
Conti recalled a batch of glue last year. I remember getting a message from them regarding it and out of the two cans purchased one of them was definitely affected. It was absolutely useless.
Contact them and I'm sure they'll warrantee/replace it for you.
Eric
-
-
Oh yea, the ones we got were ordered through worldclass, so they may have sent my info on to conti, idk...
Good luck! The can that wasn't affected worked great... it's night and day compared to the bad batch.
-
-
Had a similar problem. Didn't roll tire, but after racing it noticed that the valve stem was cocked.
Probed the tire and it just peeled off.
Bottom of can has 090313 stamped on it. Looks like a production date (European style).
-
Sold something in our classifieds? Find this site valuable?
Consider a donation to the cause. We're cheaper than eBay fees, and it helps us here at CXM keep the lights on!
Enter any amount below, and click on the cow for some good karma. Thanks!
Badge
Top Content
Blog Posts
6 Scenic Cycling Trails Around Singapore For People Who Hate Jogging
Posted by Emma stone on March 16, 2018 at 9:00pm 0 Comments 0 Likes
35 mm CX rule
Posted by Mike Macdonald on December 21, 2017 at 11:24am 0 Comments 0 Likes
Cranksgiving 2016 Is Coming Up!
Posted by R.J. Clark on November 7, 2016 at 10:43am 0 Comments 0 Likes
I want to be old, so I can kill people.
Posted by R.J. Clark on November 4, 2016 at 9:43am 0 Comments 0 Likes
© 2024 Created by Cyclocross Magazine.
Powered by
